Name: EOCR-3E420 Schnieder
SKU: 3990
Price: 640000.00 VND
Availability: InStock

Hover on the image to zoom

EOCR-3E420 Schnieder

640,000.00VND

Add Wishlist Compare Email to a Friend Print

Add to Wishlist

Danh mục: relay bảo vệ schneider Từ khóa: relay bảo vệ schneider

Mô tả

Based on MUC microcontroller (microprocessor control unit)
■ Real-time process / high precision
■ Enhanced monitoring function: monitoring distance up to 400 meters, 3-phase current display, pre-alarm (3DM2/FDM2) action reason description
■ Monitoring function: provided Communication software for use on PC
■ With overheating without current external transformer, current within 32A. Inverse time protection
■ Suitable for three-phase / single-phase motor protection
■ RoHS compliance
■ Digital setting / action cause indication and fault Exclusion
■Auto reset/reset time setting
■ For FDM2/FMZ2, normal protection is guaranteed even if PDM is disco

Protection project	Setting range and conditions	Action time
Overcurrent	When the current value on the load exceeds the set current value: Setting range: 0.5 to 60 A (definite time limit) 0.5 to 32 A (inverse time limit)	Time limit: between 0.2 and 30 seconds
Overcurrent		Inverse time limit & overheating inverse time limit: 1~30 Class
Undercurrent	The undercurrent set value cannot exceed or equal to the overcurrent set value when the current value on the load is lower than the set undercurrent value.	OFF, adjusted between 1 and 10 seconds
Reverse phase	This option can be used when the phase sequence reciprocal of the three-phase current is used .	Within 0.15 seconds
Stall	This value is set to several times the overcurrent set value. It is only suitable for the start-up process and its setting range can be adjusted. 0.5 to 30A: 2 to 8 times to 40A of overcurrent setting value : 2 to 6 times to 60A: 2 to 4 times	After D-Time time (within 0.5 seconds)
Stall	This value is set to several times the overcurrent set value. It is only suitable for operation and its setting range can be adjusted. 0.5 to 50A: 1.5 to 5 times to 60A ofthe overcurrent setting value : 1.5 to 4 times	Adjust between 0.3 and 5 seconds
Phase imbalance	Condition: Current imbalance ≥ setting imbalance % Setting range: 10 to 50% imbalance	Adjust between 1 and 10 seconds
Ground	Condition: Ground current setting range when the ground current setting value is exceeded : OFF, 0.05-10A	Adjust between 0.5 and 5 seconds — 3MZ2/FMZ2 only —

Overcurrent	Rated setting range (A)		Definite time limit: 0.5~60A: More than 60A need to use external transformer
			Inverse time limit: 0.5~60A: More than 32A need to use external transformer
Undercurrent	Rated setting range (A)		0.5A ~ less than the OC setting
Action time characteristic			Definite time/inverse time limit
time setting	Definite time limit	D-time	0~200 seconds
		O-time	0.2~30 seconds
	Inverse time limit (cLS)		1~30 classes
	Ground D-time (Edt)		0~30s (3MZ2/FMZ2)
	Ground O-time (Et)		0.05~10s (3MZ2/FMZ2)
	Automatic reset		0.5s~20 minutes.
	Reset mode		Manual reset / electric reset / automatic reset
Control voltage	Voltage		100~240VAC/DC (85% ~ 110%, Free voltage), 24VAC/DC (±5%).
	frequency		50/60Hz
	Power consumption		Less than 7VA
Output	capacity		3A/250VAC resistance.
	structure		1a1b : OC or GR
			1a : AL
display	7-segment LED		3-phase current value, ground current, trip cause, run time
	Current amplitude display stick		Operating current as a percentage of the set current is displayed
installation			Panel Mounting (3DM2/3MZ2)
			Flush mounting (FDM2/FMZ2)
insulation	Between the outer casing and the line		Over DC500V 10MΩ
Compressive strength	Between the outer casing and the line		2kV, 50/60Hz, 1 minute.
	Split grounding room		1kV, 50/60Hz, 1 minute.
	Line room		2kV, 50/60Hz, 1 minute.
Electrostatic discharge (ESD)		IEC61000-4-2	Discharge in air: ±8kv, terminal discharge: ±6kv
Electromagnetic radiation interference		IEC61000-4-3	Third level: 10v/m, 80~1000MHZ
Electromagnetic discharge		IEC61000-4-6	Third level: 10V, 0.15~80MHz
EFT/Burst		lEC61000-4-4	Third level: ±2kv, 1 minute
surge		IEC61000-4-5	Third level: 1.2 x 50μs, 4KV (0°, 90°, 180°, 270°)
Conducted interference		CISPR11	Class A (conduction and radiation)
surroundings	temperature	Storage	-40°C ~ 85°C
		jobs	-20°C ~ 60°C
	humidity		30~85% RH without condensation
weight			3DM2 / 3MZ2	FDM2 / FMZ2
		Window type	265g	350g
		Through Bottom hole type	295g	390g
		Terminal type	295 120 = 415g	390 120 = 510g
		Display section (W/3M cable)		125g
Power consumption			Less than 7VA.